Special Tools

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

J 41101: Pass-Through Connector Remover

For equivalent regional tools, refer to Special Tools .

Fig 1: View Of Transmission Wiring Harness

Courtesy of GENERAL MOTORS CORP.

Push the J 41101: remover or equivalent onto the pass-through connector from the outside of the transmission case in order to compress the pass-through connector's retaining tabs.
With the retaining tabs compressed, use a screwdriver in order to remove the pass-through connector through the inside of the transmission case.
Remove the wiring harness (11).