Wiring Harness Assembly Connect

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Wiring Harness Assembly

Courtesy of GENERAL MOTORS CORP.

Connect the wiring harness assembly to the following components:

The TFP switch assembly (13)
The pressure control solenoid (312) - red connector

NOTE: The 1-2 shift solenoids wires are red and light green. The 2-3 shift solenoid wires are red and yellow.

The 1-2 shift solenoid (305) - white connector
The 2-3 shift solenoids (305) - white connectors
The TCC solenoid (335)