LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 4T45-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Wire Harness Disconnect

Wire Harness Disconnect

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Wiring Harness Assembly
    GM1205809Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the wiring harness connectors from the pressure control solenoid (312).
  2. Disconnect the wiring harness connectors from the 1-2 and 2-3 shift solenoids (305).
  3. Disconnect the wiring harness connectors from the pressure switch assembly (13)
  4. Disconnect the wiring harness connectors from the TCC solenoid (335).
scientia non olet · About LEMON Manuals