Special Tools

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

J 45201: Cooler Line Seal Removal

For equivalent regional tools, refer to Special Tools .

Fig 1: Inserting J 45201 Into Cooler Line Seal Bore

Courtesy of GENERAL MOTORS CORP.

Insert J 45201: seal removal collet (2) fully into the cooler line seal bore.
Insert the forcing screw piece of the J 45201: seal removal (1) into J 45201: seal removal (2) and tighten.

Fig 2: Removing Cooler Line Seal With J 45201

Courtesy of GENERAL MOTORS CORP.

Thread the J 45201: seal removal collar (2) onto J 45201: seal removal (3) and tighten until the tool has removed the seal.
Use a pair of pliers to remove the cooler line seal from J 45201: seal removal.