Special Tools

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

J 28540-A: Torque Converter Seal Installer

For equivalent regional tools, refer to Special Tools .

Fig 1: Installing Torque Converter Seal

Courtesy of GENERAL MOTORS CORP.

CAUTION: Install the seal onto the tool before installing into the case to prevent damage to the seal.

Install a new torque converter seal (54). Use the J 28540-A: seal installer.