Special Tools

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

J 36850: Assembly Lubricant

For equivalent regional tools, refer to Special Tools .

Fig 1: Locating Input Carrier Assembly To Reaction Internal Gear

Courtesy of GENERAL MOTORS CORP.

Assemble the input carrier assembly (562) to the reaction internal gear (560.
Retain the input carrier assembly with the snap ring (563).
Assemble the thrust bearing (107) onto the input carrier assembly.
Retain the thrust bearing with J 36850: lubricant or equivalent. You will find another thrust bearing permanently retained in the input carrier assembly (562).