Special Tools

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

J 6125-1B: Slide Hammer with Adapter
J 38868: Output Shaft Assembly Remover and Installer

For equivalent regional tools, refer to Special Tools .

Fig 1: Removing Output Shaft Snap Ring

Courtesy of GENERAL MOTORS CORP.

Remove the snap ring (57).

Fig 2: Identifying J 6125-1B & J 38868 On Output Shaft

Courtesy of GENERAL MOTORS CORP.

Install the J 6125-1B: slide hammer with adapter and J 38868: remover and installer on the output shaft (94).