LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 4T45-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Input Speed Sensor Removal

Input Speed Sensor Removal

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Input Speed Sensor
    GM55099Courtesy of GENERAL MOTORS CORP.
  1. Remove the wiring harness connector at the input speed sensor (46).
  2. Remove the input speed sensor bolt (15) and the input speed sensor (46).
  3. Remove the wire retainer clip bolt (15) and retainer clip.
scientia non olet · About LEMON Manuals