LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 4T45-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Input Carrier and Reaction Gear Assembly Removal

Input Carrier and Reaction Gear Assembly Removal

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Input Carrier & Reaction Gear Assembly
    GM1644733Courtesy of GENERAL MOTORS CORP.
  1. Remove the input carrier and reaction internal gear assembly (106). A bearing assembly is permanently inside the input carrier.
  2. Remove the input carrier to forward clutch hub thrust bearing (107). The input carrier to forward clutch hub thrust bearing may have remained with the input carrier.
scientia non olet · About LEMON Manuals