Special Tools

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

J 28585: Snap Ring Screwdriver

For equivalent regional tools, refer to Special Tools .

Fig 1: Identifying Forward Clutch Support Snap Ring

Courtesy of GENERAL MOTORS CORP.

NOTE: The snap ring opening must be at the bottom of the transmission case. If the snap ring opening is out of position, inspect the transmission case for damage.

Remove the forward clutch support snap ring (112) from the transmission case. Use the J 28585: snap ring screwdriver or equivalent.

Fig 2: Identifying Forward Clutch Support & Low Roller Clutch Assembly

Courtesy of GENERAL MOTORS CORP.

NOTE: You may need to depress the parking pawl in order to remove the forward clutch support.

Remove the forward clutch support and the low roller clutch assembly (114). Keep the forward clutch housing to the forward clutch support thrust bearing (113) with the forward clutch support assembly (114).