LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 4T45-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Final Drive and Differential Assembly Install >> Special Tools

Special Tools

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

J 36850:  Assembly Lubricant

For equivalent regional tools, refer to Special Tools .

    Fig 1: Identifying Sun Gear Grooved Side Up
    GM20234Courtesy of GENERAL MOTORS CORP.
  1. Install the final drive carrier to case thrust bearing (117) onto the final drive carrier. Retain the bearing with J 36850:  lubricant.
  2. Install the complete final drive carrier assembly (116) into the transmission case (51).
  3. Install the thrust bearing (700) into the final drive carrier assembly (116). Retain the bearing with J 36850:  lubricant.
  4. NOTE: Install the sun gear with the grooved side up (flat side down).
  5. Install the final drive sun gear (115) into the final drive carrier (116).