LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 146 (Automatic Transmission - 4T45-E - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Driven Sprocket Support Assembly Removal

Driven Sprocket Support Assembly Removal

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Driven Sprocket Support Assembly
    GM1644726Courtesy of GENERAL MOTORS CORP.
  1. Remove the driven sprocket to driven sprocket support thrust washer (92).
  2. Remove the driven sprocket support assembly (95).