LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Engine Mechanical - 2.2L) >> Repair Instructions - On Vehicle >> Oil Level Indicator Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oil Level Indicator
    GM1571745Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
  2. Remove the oil level indicator.
    3. Fig 2: View Of Engine Harness Clip
    GM1656100Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine harness clip (2) from the oil level indicator tube bracket.
    4. Fig 3: View Of Air Conditioning (A/C) Compressor/Condenser Line Clip
    GM1694737Courtesy of GENERAL MOTORS CORP.
  4. Remove the air conditioning (A/C) compressor/condenser line clip (1) from the oil level indicator tube bracket.
    5. Fig 4: Identifying Oil Level Indicator Tube
    GM1647397Courtesy of GENERAL MOTORS CORP.
  5. Remove the oil level indicator tube bolt.
  6. Remove the oil level indicator tube.
  7. Remove the oil level indicator tube O-ring seals, if necessary.
scientia non olet · About LEMON Manuals