LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Engine Mechanical - 2.2L) >> Repair Instructions - Off Vehicle >> Oil Level Indicator and Tube Removal

Oil Level Indicator and Tube Removal

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Oil Level Indicator & Tube
    GM1867002Courtesy of GENERAL MOTORS CORP.
  1. Remove knock sensor connector from the oil level indicator tube.
  2. Remove the electrical wiring harness from the oil level indicator tube.
  3. Remove the oil level indicator tube bracket to the intake manifold bolt.
  4. Remove the oil level indicator and the oil level indicator tube from the oil pan.
scientia non olet · About LEMON Manuals