Camshaft Cover Removal
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the camshaft cover ground strap.
- Remove the front lift bracket.
- Remove the rear lift bracket.
- Remove the bolt and coil.
- Remove the camshaft position actuator solenoid valve bolts.
- Remove the camshaft position actuator solenoid valves.
- Remove the camshaft cover assembly.
- Remove and discard the camshaft cover gasket, camshaft cover grommets, and camshaft cover bolts if they are serviced with the grommet.