LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Engine Exhaust System) >> Repair Instructions >> Exhaust Manifold Heat Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Exhaust Manifold Heat Shield
    GM1631387Courtesy of GENERAL MOTORS CORP.
  1. Install the exhaust manifold heat shield (1).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the exhaust manifold heat shield studs (2) and tighten to 22 N.m (16 lb ft).
  3. Install the turbocharger assembly, if equipped. Refer to Turbocharger Replacement .
  4. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .
scientia non olet · About LEMON Manuals