LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Cooling System) >> Repair Instructions >> Radiator Inlet Hose Replacement (LNF) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling (Static Fill LNF)  or Cooling System Draining and Filling (GE 47716 Fill) .
  2. Lower the vehicle.
  3. Remove the right headlamp. Refer to Headlamp Replacement .
  4. Reposition the radiator air baffle.
    5. Fig 1: View Of Radiator Inlet Hose & Clamp
    GM2040317Courtesy of GENERAL MOTORS CORP.
  5. Reposition the radiator inlet hose clamp at the radiator using J 38185  . See Special Tools .
  6. Remove the radiator inlet hose from the radiator (1).
    7. Fig 2: View Of Radiator Inlet Hose
    GM2040400Courtesy of GENERAL MOTORS CORP.
  7. Reposition the radiator inlet hose clamp at the engine using J 38185  . See Special Tools .
  8. Remove the radiator inlet hose from the engine (1).
scientia non olet · About LEMON Manuals