LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Cooling System) >> Repair Instructions >> Radiator Inlet Hose Replacement (LE5, L61) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Radiator Inlet Hose & Radiator - 2.2L
    GM873615Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator inlet hose to the radiator.
  2. Reposition the radiator inlet hose clamp to secure the hose using J 38185  . See Special Tools .
    3. Fig 2: View Of Radiator Inlet Hose & Engine - 2.2L
    GM873618Courtesy of GENERAL MOTORS CORP.
  3. Install the radiator inlet hose to the engine.
  4. Reposition the radiator inlet hose clamp to secure the hose using J 38185  . See Special Tools .
  5. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Duct Replacement .
  6. Fill the cooling system. Refer to Cooling System Draining and Filling (Static Fill LE5, L61)  or Cooling System Draining and Filling (GE 47716 Fill) .
scientia non olet · About LEMON Manuals