LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Cooling System) >> Repair Instructions >> Radiator Air Upper Baffle and Deflector Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: View Of Left Engine Splash Shield-To-Radiator Mount Push-In Retainer
    GM899628Courtesy of GENERAL MOTORS CORP.
  2. Remove the right engine splash shield to radiator mount push-in retainer.
  3. Remove the left engine splash shield to radiator mount push-in retainer.
    4. Fig 2: View Of Cooling Fan Assembly-To-Radiator Connectors
    GM877645Courtesy of GENERAL MOTORS CORP.
  4. Remove the cooling fan assembly from the radiator by pushing up on the fan shroud to unsnap the retaining features. Position the cooling fan assembly away from the radiator and support the cooling fan assembly.
    5. Fig 3: View Of Air Dam And Push-In Retainers
    GM851691Courtesy of GENERAL MOTORS CORP.
  5. Remove the air dam push-in retainers.
  6. Remove the air dam.
    7. Fig 4: View Of Lower Radiator Mount, Brackets And Bolts
    GM877644Courtesy of GENERAL MOTORS CORP.
  7. Support the radiator and condenser. Remove the lower radiator mounts, brackets, and bolts.
    8. Fig 5: View Of Upper Radiator Air Baffle
    GM877652Courtesy of GENERAL MOTORS CORP.
  8. Lower the radiator and condenser to access the upper radiator air baffle. Remove the upper radiator air baffle.
scientia non olet · About LEMON Manuals