LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Cooling System) >> Repair Instructions >> Coolant Heater Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Coolant Heater
    GM824483Courtesy of GENERAL MOTORS CORP.
  1. Install the coolant heater.
  2. CAUTION: Refer to Fastener Caution .
  3. Install the coolant heater bolt and tighten to 10 N.m (89 lb in).
  4. Fig 2: View Of Coolant Heater Electrical Connector
    GM798929Courtesy of GENERAL MOTORS CORP.
  5. Connect the coolant heater cord (1).