Circuit/System Verification
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, verify the radiator surge tank is filled to the correct level, with engine coolant.
- Ignition ON, observe the scan tool coolant level parameter. The parameter should display OK
- Command the instrument cluster indicators ON and OFF with a scan tool. The low coolant indicator lamp should turn ON and OFF as commanded. Refer to Cooling System Description and Operation .
- The low coolant indicator should be OFF with the engine coolant at the correct level.