LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Cooling System) >> Diagnostic Information and Procedures >> Cooling Fan Inoperative (2.0L) >> Component Testing >> G10L and G10R Engine Cooling Fan

G10L and G10R Engine Cooling Fan

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the G10 engine cooling fan.
  2. Connect a jumper wire between ground and the G10 ground circuit terminal 3.
  3. Connect a 30 A fused jumper wire between B+ and the G10 B+ supply circuit terminal 1. The cooling fan should operate at a High speed:
    • If the cooling fan does operate, replace the G10 engine cooling fan.
scientia non olet · About LEMON Manuals