Conditions for Running the DTC

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0010, P0013, P0016, P0017, P0335, P0336, P0340, P0341, P0365, or P0366 is not set.
The ignition voltage is between 11-18 V.
The engine is operating.
The desire camshaft position is not changing greater than 4.5 degrees.
The desired and actual camshaft position actuator is commanded between 5-25 degrees.
DTCs P0011 and P0014 run continuously once the above conditions are met.