LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Engine Controls And Fuel - 2.0L - DTC P000A To DTC P0238) >> DTC P000A, P000B, P0011, or P0014 >> Component Testing

Component Testing

WARNING: This page is about a different car, the 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the appropriate camshaft position (CMP) actuator solenoid.
  2. Test for 7-12 Ω between the control terminal B and the ignition terminal A of the CMP actuator solenoid.
    • If not within the specified range, replace the CMP actuator solenoid.
  3. Test for infinite resistance between each terminal and the CMP actuator solenoid housing.
    • If less than the specified value, replace the CMP actuator solenoid valve.
scientia non olet · About LEMON Manuals