LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Manual Transmission - Mu3) >> Repair Instructions - On Vehicle >> Transmission Control Lever Boot Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Shift Control Boot Trim
    GM1549365Courtesy of GENERAL MOTORS CORP.
  1. Install the shift control boot to the vehicle.
  2. Install the shift control boot trim to the console assembly.
  3. Install the shift control knob. Refer to Transmission Control Lever Knob Replacement .