LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Manual Transmission - Mu3) >> Repair Instructions - On Vehicle >> Shift Control Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the console top cover. Refer to Front Floor Console Replacement .
  2. Remove the shift cables from the shifter assembly. Refer to Shift Control Cable Replacement .
  3. Fig 1: Locating Floor Pan Grommet & Mounting Nuts
    GM867994Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 front mounting nuts (2).
  5. Remove the 2 rear mounting nuts (3) and the shifter.