Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Slide the sunshade rearward.

CAUTION: In order to prevent damage to the paint, mask the roof panel in front of the sunroof opening using masking tape and paper.

Cycle the sunroof window to the vent position.

Fig 1: View of Sunroof Window & Screws

Courtesy of GENERAL MOTORS CORP.

Remove the sunroof window screws (1) from the window.

NOTE: Do NOT scratch the roof surface or the sunroof window.

Lift the sunroof window from the sunroof opening.