Secondary Air Injection Pump Replacement
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Disconnect the secondary injection pump hose. Refer to Secondary Air Injection Pump Hose Replacement |
|
| 1 | Secondary Air Injection Pump Bolt (Qty: 3)
CAUTION:
Refer to Fastener Caution
.
Tighten: 30 N.m(22 lb ft). |
| 2 | Secondary Air Injection Pump |