LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Engine Controls And Fuel - 2.2L - Repair Instructions) >> Repair Instructions >> Secondary Air Injection Pump Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Secondary Air Injection Pump Hose Replacement
    GM2093703Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the secondary air injection pump hose (1) from the secondary air injection pump. Refer to Plastic Collar Quick Connect Fitting Service 
    2. Fig 2: Identifying Secondary Air Injection Pump Hose & Secondary Air Injection Check Valve
    GM2093739Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the secondary air injection pump hose (1) from the secondary air injection check valve. Refer to Plastic Collar Quick Connect Fitting Service 
  3. Remove the secondary air injection pipe from the vehicle.
scientia non olet · About LEMON Manuals