Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Camshaft Position Actuator Solenoid Valve Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Ensure that the ignition key is in the OFF position.
Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
Disconnect the ignition coil electrical connector(s) (1).

Fig 2: View Of Ignition Coils

Courtesy of GENERAL MOTORS CORP.

Remove the ignition coil bolt(s).
Remove the ignition coil(s).