Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Ignition Coils

Courtesy of GENERAL MOTORS CORP.

Install the ignition coil(s).

CAUTION: Refer to Fastener Caution .

Install the ignition coil bolt(s) and tighten to 10 N.m (89 lb in).

Fig 2: Camshaft Position Actuator Solenoid Valve Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the ignition coil electrical connector(s) (1).
Install the intake manifold cover. Refer to Intake Manifold Cover Replacement .