Removal Procedure
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
- Loosen the clamps at the air cleaner housing and throttle body.
- Reposition the positive crankcase ventilation (PCV) hose clamp at the camshaft cover.
- Remove the PCV hose from the camshaft cover.
- Remove the push pin retainer.
- Remove the air cleaner outlet duct.
- If necessary, reposition the PCV hose clamp at the outlet duct.
- If necessary, remove the PCV hose from the outlet duct.