LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Actuator Cylinder Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Hydraulic Clutch Hose
    GM851233Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the clutch actuator cylinder line.
  2. Remove the transmission. Refer to Transmission Replacement .
    3. Fig 2: Locating Clutch Actuator Cylinder Bolts
    GM621539Courtesy of GENERAL MOTORS CORP.
  3. Remove the clutch actuator cylinder bolts from the transmission.
    4. Fig 3: Locating Upper Line Release Bolt
    GM621542Courtesy of GENERAL MOTORS CORP.
  4. Remove the following components from the transmission:
    • The upper bolt
    • The clutch actuator cylinder
scientia non olet · About LEMON Manuals