LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Wheel Drive Shafts) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Intermediate Drive Shaft Bracket-to-Engine Block Bolts 50 N.m 37 lb ft
Wheel Drive Shaft Nut - Except LNF and MU3 210 N.m 155 lb ft
Wheel Drive Shaft Nut - LNF and MU3 215 N.m 159 lb ft