Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Refer to Brake Dust Warning .

WARNING: Refer to Brake Fluid Irritant Warning .

Remove the brake drum. Refer to Brake Drum Replacement .
Clean the area surrounding the wheel cylinder of dirt and debris.

Fig 1: Brake Pipe Fitting

Courtesy of GENERAL MOTORS CORP.

Disconnect the wheel cylinder brake pipe fitting (1).
Cap the brake pipe fitting to prevent brake fluid loss and contamination.

Fig 2: Cylinder Bolts

Courtesy of GENERAL MOTORS CORP.

Remove the wheel cylinder bolts (1).

Fig 3: Wheel Cylinder

Courtesy of GENERAL MOTORS CORP.

Spread the top of the brake shoes slightly and remove the wheel cylinder (1).