LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Parking Brake System) >> Repair Instructions >> Parking Brake Indicator Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Warning Lamp Switch Mounting Screw & Electrical Connector
    GM891314Courtesy of GENERAL MOTORS CORP.
  1. Remove the front floor console upper trim plate. Refer to Console Front Trim Plate Replacement .
  2. Disconnect the warning lamp switch electrical connector (2).
  3. Remove the warning lamp switch mounting screw (1).
  4. Remove the switch from the park brake lever assembly.
scientia non olet · About LEMON Manuals