LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Hydraulic Brake System) >> Diagnostic Information and Procedures >> Brake Warning Indicator Malfunction >> Component Testing >> Brake Fluid Level Switch Malfunction

Brake Fluid Level Switch Malfunction

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the brake fluid level switch.
  2. Test for infinite resistance between the ground terminal B and the signal terminal A.
    • If less than the specified value, replace the brake fluid level switch.
scientia non olet · About LEMON Manuals