LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transmission - 4T45-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Rear Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the transaxle with an appropriate jack.
    3. Fig 1: Rear Transaxle Mount
    GM1546903Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear transaxle mount thru bolt and heat shield.
    4. Fig 2: View Of Rear Transaxle Mount To Frame Bolts
    GM851572Courtesy of GENERAL MOTORS CORP.
  4. Remove the rear transaxle mount to frame bolts.
  5. Remove the rear transaxle mount.
scientia non olet · About LEMON Manuals