LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transmission - 4T45-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Front Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the transaxle with an appropriate jack.
  3. Fig 1: View Of Front Transaxle Mount Through Bolt
    GM1497621Courtesy of GENERAL MOTORS CORP.
  4. Remove the front transaxle mount thru bolt.
  5. Fig 2: View Of Front Transaxle Mount
    GM1506918Courtesy of GENERAL MOTORS CORP.
  6. Remove the front transaxle mount to transaxle bolts.
  7. Remove the front transaxle mount from the vehicle.