LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transmission - 4T45-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Control Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the console. Refer to Front Floor Console Replacement .
  2. If necessary, remove the shift control knob. Refer to Transmission Control Lever Knob Replacement .
    3. Fig 1: View Of Shift Control
    GM851244Courtesy of GENERAL MOTORS CORP.
  3. Remove the shift cable retaining clip.
  4. Disconnect the shift cable from the shift control assembly.
    5. Fig 2: View Of Shift Control Mechanism
    GM1663966Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the shift lock solenoid harness connector (4).
  6. Remove the shift control nuts (2).
  7. Remove the shift control (3) from the vehicle.
scientia non olet · About LEMON Manuals