Installation Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Place the shift control in NEUTRAL before attempting to install the shift knob screw.

Fig 1: Shift Knob & Bezel

Courtesy of GENERAL MOTORS CORP.

Install the bezel (2) and shift knob (1) to the shift control lever.

Fig 2: Shift Knob Retaining Screw

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the shift knob retaining screw (1) and tighten to 2 N.m (18 lb in).

Fig 3: Shift Knob Bezel

Courtesy of GENERAL MOTORS CORP.

Secure the shift knob bezel (1) to the shift knob.