LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transmission - 4T45-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Oil Pan Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Fig 1: Identifying Oil Pan Bolts
    GM104466Courtesy of GENERAL MOTORS CORP.
  3. Loosen the oil pan bolts.
  4. Drain the oil. Use a suitable container to catch the transmission fluid.
  5. Remove the oil pan attaching bolts.
  6. Fig 2: View of Oil Pan
    GM104468Courtesy of GENERAL MOTORS CORP.
  7. Remove the oil pan.
  8. Fig 3: Locating Oil Pan Gasket
    GM104471Courtesy of GENERAL MOTORS CORP.
  9. Remove the oil pan gasket.