LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Automatic Transmission - 4T45-E - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Intermediate/Fourth Servo Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the oil pan and filter. Refer to Automatic Transmission Fluid Filter and Seal Replacement .
    3. Fig 1: View Of Intermediate/Fourth Servo Assembly & Bolts
    GM589165Courtesy of GENERAL MOTORS CORP.
  3. Remove the two intermediate/4th servo cover bolts, the servo and the spring.
scientia non olet · About LEMON Manuals