LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Manual Transmission - M86) >> Repair Instructions - On Vehicle >> Shift Control Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the left front wheel. Refer to Tire and Wheel Removal and Installation .
    2. Fig 1: View Of Shift Cables, Cable Connections & Shift Cable Bracket
    GM880090Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the shift cables from the transmission.
    3. Fig 2: View Of Shifter Guide Bolt
    GM513880Courtesy of GENERAL MOTORS CORP.
  3. Shift the transmission into neutral.
  4. Remove the shifter guide bolt.
    5. Fig 3: View Of Shifter And Retaining Bolts
    GM513882Courtesy of GENERAL MOTORS CORP.
  5. Remove the 5 shifter retaining bolts.
  6. Remove the shifter assembly from the vehicle.
scientia non olet · About LEMON Manuals