CTD Circuit Description: Inputs
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
The BCM monitors the following inputs for CTD:
- The door ajar switches
- The keyless entry transmitter LOCK/UNLOCK buttons; a serial data message from the RCDLR
- The immobilizer status-The BCM uses the immobilizer status for disarming the system or silencing an alarm when the correct vehicle key is used to start the vehicle
- The rear compartment ajar switch
- The hood ajar switch