LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2012 >> Cruze Eco, Automatic Trans >> Repair and Diagnosis >> Electrical >> Instrument Panel System Displays And Gauges >> Repair Instructions >> Instrument Cluster Replacement

Instrument Cluster Replacement

Fig 1: Instrument Cluster
GM2537965Courtesy of GENERAL MOTORS COMPANY
Instrument Cluster Replacement

Callout Component Name

Preliminary Procedure

  1. Prepare instrument cluster for replacement. Refer to Control Module References .
  2. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  3. Remove the lower instrument panel cluster trim plate. Refer to Instrument Panel Cluster Lower Trim Plate Replacement .
  4. Remove the steering column upper trim cover. Refer to Steering Column Upper Trim Cover Replacement .
1 Instrument Cluster Screw (Qty: 4)
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5 Y (22 lb in)
2 Instrument Cluster

Procedure

  1. Disconnect electrical connector.
  2. After replacement, refer to Control Module References for programming and set up procedures.
scientia non olet · About LEMON Manuals