Driver or Passenger Seat Replacement

Fig 1: View Of Driver Or Passenger Seat

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Enable the SIR system. Refer to SIR Disabling and Enabling . Remove the driver seat adjuster finish cover. Refer to Driver or Passenger Seat Adjuster Finish Cover Replacement . Remove the seat belt retaining nut and the seat belt from the anchor stud. Refer to Seat Belt Retractor Replacement - Left Front (Coupe) , Seat Belt Retractor Replacement - Left Front (Convertible) .
1	Driver and Passenger Seat (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 50 N.m (37 lb ft)
2	Driver and Passenger Seat Nut Tighten 50 N.m (37 lb ft)
3	Driver and Passenger Seat Procedure Disconnect any electrical connectors. Transfer components as necessary.