Seat Belt Retractor Replacement - Right Front (Coupe)

Seat Belt Retractor Replacement - Right Front (Coupe)

Removal Procedure

1. Remove the passenger seat. Refer to Driver or Passenger Seat Replacement [1][2]Driver or Passenger Seat Replacement.

2. Remove the rear trim panel (1). Refer to Rear Compartment Side Trim Panel Replacement Rear Compartment Side Trim Panel Replacement.





3. Remove the bolt attaching the retractor (2).

4. Remove the retractor assembly from the vehicle.

Installation Procedure

1. Position the retractor assembly in the vehicle.





Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the retractor bolt (2).

Tighten the bolt to 41 Nm (31 lb ft).

3. Install the rear trim panel (1). Refer to Rear Compartment Side Trim Panel Replacement Rear Compartment Side Trim Panel Replacement.

4. Install the passenger seat. Refer to Driver or Passenger Seat Replacement [1][2]Driver or Passenger Seat Replacement.