Active Exhaust System Actuator: Service and Repair

Exhaust Tail Pipe Flow Control Valve Solenoid Replacement

Removal Procedure





1. Removal the right inner tail lamp lens screw.





2. Removal the right inner tail lamp lens.





3. Working through the tail lamp opening, disconnect the electrical connector.





4. Disconnect the vacuum hose from the solenoid.

5. Remove the solenoid.

Installation Procedure

1. Install the solenoid.





2. Working through the tail lamp opening, connect the vacuum hose to the solenoid.





3. Connect the electrical connector.





4. Install the tail lamp lens.





5. Install the tail lamp lens screw.