Glove Box Lamp Switch: Service and Repair

Instrument Panel Compartment Lamp Switch Replacement

Removal Procedure





1. Remove the instrument panel (I/P) passenger compartment. Refer to Instrument Panel Compartment Replacement Service and Repair.

2. Depress the tabs on the sides of the I/P compartment lamp switch.

3. Carefully push the switch and lamp unit out of the opening and remove.

Installation Procedure





1. Position the I/P compartment lamp and switch unit into the opening in the I/P passenger compartment.

2. Push on the switch, snapping the switch into the panel.

3. Install the I/P passenger compartment. Refer to Instrument Panel Compartment Replacement Service and Repair.